Safety Inspection Compressed Gas Cylinder by Gas Cylinders Manufacturers

 

Compressed gas cylinders are one of the potential hazards in a chemical Gas Cylinders Manufacturers plant. Examples of potential hazards associated with a compressed gas cylinder are high pressure gases, hazardous gases, falling objects, fires, explosions, and gas leaks.

In general, cylinders are used to store a variety of gases such as ethylene, hydrogen, carbon monoxide, acetylene, butane, propane, oxygen, nitrogen, and methane. Those gases are flammable and non-flammable gases.

According to the US Department of Labor, Bureau of Labor Statistics, there were 5,160 injuries and 17 deaths in 2004 due to pressurized containers.

If you are using a compressed gas cylinder in your workplace, you must ensure its safety by conducting regular inspections by Gas Cylinders Manufacturers in India. Otherwise, there will be injury, death and property damage.

This article has been written to give a compressed gas cylinder safety inspection checklist, which can be used as a note to conduct routine inspections.

 Safety Inspection Checklist for Gas Cylinder

• Never get a gas cylinder without a clear label, damage shell or incomplete stuff.
• Ensure proper label attached to the cylinder. It should be clear and easy to find. This is very important to prevent the misuse of some gases.
• Is its shell in good condition? Is it already anticipated?
• Are its accessories such as regulator pressure control, valves, pressure gauge, valves and safety caps complete and in good condition?
• It is to be stored in an upright position.
• Keep the safety cap on when it is not in use.
• Keep it in the proper storage area. It has to be free from ignition sources, heat sources and good ventilation.
• Is it stored safely? It should be secured by lower and upper chains to prevent it from falling.
• Don't forget to check the status of the chain. In general, corrosion is the main problem of chains.
• Is the storage area free of vehicle and forklift traffic?
• Separate flammable and flammable gases as per standard.
• Ensure that there is no stock of cylinders. More cylinders mean more hazards.
• Empty and complete cylinder separated.
• Keep marking appropriate for this purpose.
• Use hand truck to transport cylinders.
• Ensure that the capacity of the hand truck is sufficient.
• Hand truck maintenance is done regularly.
• Never use a damaging truck to transport the cylinder.
• Only trained people can use, transport and store cylinders.
• Are pressure tests done regularly every five years?

Regular safety inspection is very important to ensure cylinder safety. Create a schedule for this security inspection by Gas Cylinders Manufacturers. And don't forget to review the checklist regularly to make sure it is still reliable.